BPL DF 2509 R-Monophasic Defibrillator

Buy Monophasic Defibrillator for Hospital: DF 2509 -R

This BPL Defibrillator DF 2509 R is the best hospital-grade device designed for effective cardiac emergency response. Its high-speed charging, synchronized shock delivery, and real-time monitoring make this advanced defibrillator machine is the best critical life saving tool in any medical facility

Features of the Monophasic Defibrillator Machine

  • Quick Charging: Charges to 360 j in less that 5 Seconds ( Both on AC mains and fully charged battery)
  • Display:  5-7 Inch premium monochrome LCD display withh CCFL backlight: Sharp, non fading visuals.
  • Event Recording: It can store and prints up to 24 events ( 3 Sec pre + 7 Sec  post data)
  • Printing: Comes with thermal Thermal array printer with real time and automatic print modes.
  • Audible and Visual Indicators: Charge ready LED and tone indicators on the panel and paddles 

Specification of the DF 2069 Defibrillator

  • Waveform: 5 ms monophasic low pulse
  • External Paddles: 0 – 360 J ( Selectable in steps: 2,3,5,7,10,20,30,50,70,100,150,200,300,360)
  • Internal Paddles: 0 -50j ( Selectable in Steps)
  • Sync Function: Synchronised to the R wave with a marker on the ECG waveform
  • Energy Display:  Selected and delivered energy shown on screen
  • Electrodes: Standard adult (84.5 cm²) and pediatric 920 cm²) with slide off design
  • Paddle Cable:  Retractable, 600 mm ( Coiled) 3000 mm (Standard)

Monitoring Capabilities of the Defibrillator 

  • Leads: I, II, III (Via paddle and patient cable ECG)
  • Heart Rate Range: 10 – 300 BPM; Accuracy: ± BPM or 2%
  • CMPRR: >90 dB at 50 Hz
  • Input Impedance: >2.5 MΩ
  • Frequency Response: 0.5 – 35 Hz
  • Display Time: 4 Sec with 20 mm/Sec Sweep Speed
  • Alarm: Audio visual user selectable HR limits (20 -300 BPM)
  • Cautery Filter: Built in for interference resistance
  • 1mv Cal Signal:  Gain – Dependent bar indication
  • Patient Cable Length: Three Meter

Specifications of the Defibrillator Printer

  • Type off the Printer:  Thermal Array
  • Paper Size: 50 mm width . 20 mm length
  • Print Width: 40 mm
  • Speed: 25 mm / Sec
  • Modes: Real-Time or 6 Sec Delay ( this are Auto modes)
  • Annotations: Include time, HR,  ECG parameters, selected and delivered energy, peak current, impedance and hospital name.
Battery and Power
  • Input Power: 100 – 230 V AC ± 15% 50 /60 Hz
  • Consumption: <100 VA
  • Battery Type: Rechargeable sealed lead acid
  • Battery Capacity: 12V, 4.5 Ah – Supports 100 Discharges at 360 J or up to 7 hours of monitoring 
Dimensions of the Defibrillator
  • Width: 260 mm
  • Depth: 280 mm
  • Height: 250 mm
  • weight: 10.5 kg includes printer, paddles, and battery
Environmental Conditions:
  • Operating Temperature: 0°C to 40° C
  • Relative Humidity: 15% to 95 % RH
Accessories for Defibrillator
  • Adult and pediatric defibrillator paddle (1 set)
  • 30 disposable electrodes
  • 3 – lead patient ECG cable
  • Mains Power Cable 
  • Earth Cable
  • Cardiology gel Bottle 
  • User Manual
  • Accessory bag
  • 1 Roll of 20-meter recording paper 
Different Uses and Applications of the Defibrillator Machine
  • Hospitals and Emergency rooms
  • Intensive care units
  • Cardiac care centers
  • Ambulances and mobile emergency services

Reviews

There are no reviews yet

Be the first to review “BPL DF 2509 R-Monophasic Defibrillator”

Your email address will not be published. Required fields are marked *